Operating Instructions

Warning: Eye protection must be worn while operating this instrument.

Note: Before using this instrument it should be tested for any gas leaks that may occur at the various connections. This may be accomplished by pressurizing the instrument and applying a soapy water solution to the various connections. A bubble will form if any leaks are occurring The instrument may also be pressurized, submerged in a glass tank of water, and leaks detected in this manner.

Operation:

1. Set test container under cross bar with rubber on the top surface.

2. Use quick downward pressure and the container is pierced.

3. Adjust purge needle to your preference.

4. Automatically adjusts to container size and height.